User guide
Table Of Contents
- Title Page
- About
- Contents
- Introduction
- Installing the AR100 Series Internet Router
- Getting Connected
- About Web Access to the AR100
- Configuring for the First Time
- Configuring for a Leased Line
- Changing Your Configuration
- Using Telephony Services
- Accessing Router Utilities
- Troubleshooting
- Safety and Statutory Information
3-26 Connecting additional PCs
6. Windows 95 and 98: In the TCP/IP Properties dialog box, click on the IP
Address tab.
Windows 2000: The Internet Protocol (TCP/IP) Properties dialog corre-
sponds to the IP Address, DNS Configuration and Gateway tabs in Win-
dows 95 and 98.
Figure 3-32: TCP/IP Properties IP Address tab
If field A in Table 3-1 shows the IP addresses are obtained automatically,
select Obtain IP address automatically. If field B in Table 3-1 shows Specify
an IP address, select Specify an IP address and enter the IP address for the
new PC from fields M, N or O in Table 3-1.
7. Click on the DNS Configuration tab.