User guide
Table Of Contents
- Title Page
- About
- Contents
- Introduction
- Installing the AR100 Series Internet Router
- Getting Connected
- About Web Access to the AR100
- Configuring for the First Time
- Configuring for a Leased Line
- Changing Your Configuration
- Using Telephony Services
- Accessing Router Utilities
- Troubleshooting
- Safety and Statutory Information

Getting Connected 3-25
Figure 3-30: Select Network Protocol dialog.
Select Microsoft from the Manufacturers list and TCP/IP from the Network
Protocols list. Click OK to dismiss the dialog box.
5. In the Network dialog box, select TCP/IP and click Properties. (If your PC
has more than one network adapter, in the Network dialog box, select the
TCP/IP entry for the network adapter connected to the router, and click
Properties. If TCP/IP is installed over a Dial Up Adapter, do not select this.)
Figure 3-31: Network dialog.