User guide
Table Of Contents
- Title Page
- About
- Contents
- Introduction
- Installing the AR100 Series Internet Router
- Getting Connected
- About Web Access to the AR100
- Configuring for the First Time
- Configuring for a Leased Line
- Changing Your Configuration
- Using Telephony Services
- Accessing Router Utilities
- Troubleshooting
- Safety and Statutory Information
Getting Connected 3-23
Configure TCP/IP on additional PCs
You now have all the information you need to configure TCP/IP on the addi-
tional PCs. For each additional PC, follow these steps.
1. In the Windows Start menu, point to Settings and click the Control Panel.
Figure 3-27: Windows Control Panel
2. Windows 95 and 98: In the Control Panel, double click the Network icon to
display the Network dialog.
Windows 2000: In the Control Panel, click Network and Dial-up Connec-
tions. In the Network and Dial-up Connections dialog, right click on the
Local Area Connection icon, and select Properties. The Local Area Connec-
tion Properties dialog opens, corresponding to the Network dialog in Win-
dows 95 and 98. (If the Local Area Connection icon does not appear, check
that your network adapter card is correctly installed and configured.)