User guide
Table Of Contents
- Title Page
- About
- Contents
- Introduction
- Installing the AR100 Series Internet Router
- Getting Connected
- About Web Access to the AR100
- Configuring for the First Time
- Configuring for a Leased Line
- Changing Your Configuration
- Using Telephony Services
- Accessing Router Utilities
- Troubleshooting
- Safety and Statutory Information
3-20 Connecting additional PCs
5. Click on the DNS Configuration tab.
Figure 3-24: DNS Configuration tab
Record the host name in field F and the DNS server search order in field G
in Table 3-1.
If the PC’s IP address is set to Specify an IP address (field B in Table 3-1),
continue at step 6 on page 3-21 to record the gateway.
If the PC’s IP address is set to Obtain an IP address automatically (field A
in Table 3-1) click Cancel to close the TCP/IP Properties dialog. Click OK to
close the Network dialog. Click the Close button in the Control Panel title
bar to close the Control Panel. Go to step 1 on page 3-22 to check the rout-
er’s DHCP server.