User guide
Table Of Contents
- Title Page
- About
- Contents
- Introduction
- Installing the AR100 Series Internet Router
- Getting Connected
- About Web Access to the AR100
- Configuring for the First Time
- Configuring for a Leased Line
- Changing Your Configuration
- Using Telephony Services
- Accessing Router Utilities
- Troubleshooting
- Safety and Statutory Information
Getting Connected 3-19
3. Windows 95 and 98: In the TCP/IP Properties dialog box, click on the IP
Address tab.
Windows 2000: The Internet Protocol (TCP/IP) Properties dialog corre-
sponds to the IP Address, DNS Configuration and Gateway tabs in Win-
dows 95 and 98.
Figure 3-23: TCP/IP Properties - IP Address tab
4. Record whether the PC is set to Obtain IP address automatically in field A
in Table 3-1 on page 3-16, or Specify an IP address in field B in Table 3-1. If
the PCs IP address is set to Specify an IP address, record the IP Address in
field C and the Subnet Mask in field D in Table 3-1.