User guide

Table 3-1: Check list for configuring additional PCs
Configuration parameter Examples Enter your data below
Check the TCP/IP configuration on the first PC. Record whether the IP address is
dynamically or statically allocated in field A or field B. If the first PC is configured with a
specified IP address, record the IP address in field C and the subnet mask in field D.
Obtain IP address automatically
✓
A
Specify an IP address
✓
B
IP Address for first PC
192.168.163.21
C
Subnet Mask
255.255.255.0
D
From the DNS Configuration tab on the first PC, record the DNS Server Search Order in
field G and the DNS host in field F.
DNS Configuration
Enable DNS
E
DNS Host for first PC
PC1
F
DNS Server Search Order
192.168.163.2
G
If field B above shows Specify an IP address, record the gateway address in field H.
Gateway address
192.168.163.3
H
Is the router’s DHCP server is enabled or disabled? Record this in field I.
AR100 DHCP server
disabled
I
Enter a DNS host name for each additional PC in field J, field K and field L.6
DNS Host for second PC
PC2
J
DNS Host for third PC
PC3
K
DNS Host for fourth PC
-------------------
L
If field B above shows Specify an IP address, record a free IP address for each additional PC
in field M, field N and field O. Ask your network administrator for assistance. If field A
shows that IP addresses are obtained automatically, draw a line through field M, field N
and field O.
IP Address for second PC
192.168.163.22
M
IP Address for third PC
192.168.163.24
N
IP Address for fourth PC
-------------------
O
If field B above shows Specify an IP address, enter No in field P. If field I shows that the
router’s DHCP server is enabled, enter No in field P. If field A shows that IP addresses are
obtained automatically and field I shows that the router’s DHCP server is disabled, enter
Yes i n fiel d P.
Another DHCP server to
configure
No
P
If the PC has been used for Windows 95 or 98 dial up networking, enter Yes in field P.
Change from dial up
networking
Yes
Q