User guide
Table Of Contents
- Title Page
- About
- Contents
- Introduction
- Installing the AR100 Series Internet Router
- Getting Connected
- About Web Access to the AR100
- Configuring for the First Time
- Configuring for a Leased Line
- Changing Your Configuration
- Using Telephony Services
- Accessing Router Utilities
- Troubleshooting
- Safety and Statutory Information
Getting Connected 3-13
7. The Domain Name Server Address dialog (Figure 3-17) allows you to enter
a DNS address. Your ISP will have supplied at least one DNS address.
Figure 3-17: Domain Name Server Address dialog
Enter the IP address for the DNS server you want your PC to use, and click
Next.
If you have more than three DNS addresses configured, the Overwrite Do-
main Name Server Address dialog (Figure 3-18) opens. Otherwise the new
DNS address is entered, and the Select Your Country dialog (Figure 3-19)
opens.
Figure 3-18: Overwrite Domain Name Server Address dialog
Your PC can only have a limited number of DNS addresses. If this dialog
appears, you have tried to add one too many. You will have to replace one
of the existing DNS addresses with the new one that you want the PC to use,
entered in the previous dialog box.
Select an IP address that you no longer need in the list. Click Next to replace
it with the IP address for the new DNS server.