User guide
Table Of Contents
- Title Page
- About
- Contents
- Introduction
- Installing the AR100 Series Internet Router
- Getting Connected
- About Web Access to the AR100
- Configuring for the First Time
- Configuring for a Leased Line
- Changing Your Configuration
- Using Telephony Services
- Accessing Router Utilities
- Troubleshooting
- Safety and Statutory Information
Getting Connected 3-9
1. Start the AR100 Access Wizard by clicking Configure Router
on the CD’s
Welcome screen. The Welcome to the AR100 Access Wizard dialog (Figure
3-10) opens.
Figure 3-10: Welcome to the AR100 Access Wizard dialog
In the Welcome dialog, click on the Start button. The Select a Router dialog
(Figure 3-11) opens, and the AR100 Access Wizard searches for all the
AR100 Series routers on the local LAN.
2. The Select a Router dialog (Figure 3-11) displays the AR100 routers that the
Access Wizard has found.
Figure 3-11: Select a Router dialog
Select the router you want to configure, and click Next.
If you select a router that is already configured, your web browser connects
you to the AR100 Management Wizard.
If you select a router that has not yet been configured, the Choosing an IP
Address dialog (Figure 3-12) opens.