User guide
Table Of Contents
- Title Page
- About
- Contents
- Introduction
- Installing the AR100 Series Internet Router
- Getting Connected
- About Web Access to the AR100
- Configuring for the First Time
- Configuring for a Leased Line
- Changing Your Configuration
- Using Telephony Services
- Accessing Router Utilities
- Troubleshooting
- Safety and Statutory Information
3-2 Configuring your PC
1. In the Windows Start menu, point to Settings and click the Control Panel.
Figure 3-1: Windows Control Panel
2. Windows 95 and 98: In the Control Panel, double click the Network icon to
display the Network dialog box.
Windows 2000: In the Control Panel, click Network and Dial-up Connec-
tions. In the Network and Dial-up Connections dialog, right click on the
Local Area Connection icon, and select Properties. The Local Area Con-
nection Properties dialog opens, corresponding to the Network dialog in
Windows 95 and 98. (If the Local Area Connection icon does not appear,
check that your network adapter card is correctly installed and config-
ured.)