User guide
Table Of Contents
- Title Page
- About
- Contents
- Introduction
- Installing the AR100 Series Internet Router
- Getting Connected
- About Web Access to the AR100
- Configuring for the First Time
- Configuring for a Leased Line
- Changing Your Configuration
- Using Telephony Services
- Accessing Router Utilities
- Troubleshooting
- Safety and Statutory Information
Chapter 2
Installing the AR100 Series Internet
Router
Please read Chapter 11, Safety and Statutory Information before installing the
AR100 router. It contains important safety information. The Start Here Guide
also shows step by step how to install your router, and includes pictures of the
components.
Unpack your router
Check the contents of the shipping carton. If any items are missing or dam-
aged, contact the shipping agent or your authorised Allied Telesyn distributor
or reseller immediately. Keep the shipping box, if possible. The shipping carton
should include:
■
AR130 or AR140 Internet Router
■
Power supply unit
■
Green ISDN cable
■
Two voice stub cables (AR140 only)
■
Two green S-bus termination straps
■
Start Here Guide
■
Warrant y card
■
AR100 Series Installer and Documentation CD-ROM.
Note: The two green S-bus termination straps are not needed in most situations,
and the router uses line termination in the building. If you need to change your
router to network termination, contact your Allied Telesyn distributor or re-
seller. Do not attempt to install them yourself. They must only be installed by
authorised service personnel.