User guide
Table Of Contents
- Title Page
- About
- Contents
- Introduction
- Installing the AR100 Series Internet Router
- Getting Connected
- About Web Access to the AR100
- Configuring for the First Time
- Configuring for a Leased Line
- Changing Your Configuration
- Using Telephony Services
- Accessing Router Utilities
- Troubleshooting
- Safety and Statutory Information
10-16 Advanced troubleshooting utility
Advanced troubleshooting utility
You can get more detail about the router’s operation using the Troubleshooting
utility. If you use this page, you can refer to the Reference Manual, also on the
AR100 CD, for explanations of the data reported.
1. Click on the Troubleshoot button in the AR100 Main Menu page (Figure
9-1). The Troubleshooting page (Figure 10-12) opens.
Figure 10-12: Troubleshooting page
2. Select the kind of data you want a report of in the pick lists. Click the View
Output button to see a report.
3. To return to the Troubleshooting page (Figure 10-12), click the OK button
on the report page.
■
If you want to restart the AR100 Configuration Wizard, click Restart Wiz-
ard. This will remove an existing configuration. A warning dialog asks you
to confirm that you want to remove the existing configuration.
■
If you reset factory defaults, you will need to use the AR100 Access Wizard
to initialise the router again. A warning dialog asks you to confirm that
you want to remove the existing configuration.