User guide
Table Of Contents
- Title Page
- About
- Contents
- Introduction
- Installing the AR100 Series Internet Router
- Getting Connected
- About Web Access to the AR100
- Configuring for the First Time
- Configuring for a Leased Line
- Changing Your Configuration
- Using Telephony Services
- Accessing Router Utilities
- Troubleshooting
- Safety and Statutory Information
10-4 Communication problems between PC and router
5. Select your Ethernet adapter card’s manufacturer in the Manufacturers
field and your Ethernet adapter card in the Network Adapters field. If you
have the installation disk, click Have Disk and follow the instructions giv-
en. Otherwise click OK to save your changes. The Ethernet adapter card
appears in the Network dialog Configuration list.
6. Click OK to close the Network dialog. Click the Close button in the Control
Panel title bar to close the Control Panel.
7. Restart your PC.
No web browser
You need a web browser to access and configure the router. If this dialog box
appears, you will need to install a web browser on your PC.
Figure 10-2: No Web Browser dialog
■
Insert the AR100 CD into the PC’s CD-ROM drive, and Install Software to
install Netscape Navigator or Microsoft Internet Explorer.