User guide
Table Of Contents
- Title Page
- About
- Contents
- Introduction
- Installing the AR100 Series Internet Router
- Getting Connected
- About Web Access to the AR100
- Configuring for the First Time
- Configuring for a Leased Line
- Changing Your Configuration
- Using Telephony Services
- Accessing Router Utilities
- Troubleshooting
- Safety and Statutory Information
Changing Your Configuration 7-3
Figure 7-3: System Information page
■
Enter a new password. REMEMBER THIS PASSWORD. WRITE IT DOWN
AND KEEP IT IN A SECURE PLACE.
Caution: The router’s password is encrypted as soon as you save it, so if you
forget or lose this password, there is no way to retrieve it. If this happens you
will be unable to reach your router’s configuration or other utilities.
■
Make sure the correct Domain Name Server (DNS) address for your router
is entered. The DNS server translates IP domain names, for instance
alliedtelesyn.co.nz, to IP addresses, for instance 123.156.78.9, so that data is
sent to the right address.
■
Make sure the correct country is selected.
■
You can enter a unique router name for administering your network.
■
You can enter your owner contact details.