User guide
Table Of Contents
- Title Page
- About
- Contents
- Introduction
- Installing the AR100 Series Internet Router
- Getting Connected
- About Web Access to the AR100
- Configuring for the First Time
- Configuring for a Leased Line
- Changing Your Configuration
- Using Telephony Services
- Accessing Router Utilities
- Troubleshooting
- Safety and Statutory Information

6-32 Internet dial-on-demand & inter-office leased line connections
8. The Remote IP Networks page (Figure 6-27) shows which IP subnetworks
this router has access to at the remote office. Data for destinations in the
subnetworks listed here will be sent on the remote office connection. Data
for destinations not specified here will be sent on the Internet connection.
The first time you reach this page, there will be no subnetworks listed. Your
network administrator at the remote office will supply you with a list of IP
address ranges and masks.
Figure 6-27: Remote IP Networks page
■
To add an IP subnetwork, click Add New Network. The New IP Net-
work page (Figure 6-28) opens.
■
To remove an IP address range, click Remove.
■
When the list is complete, click Next. The Configuration Summary: In-
ternet dial-on-demand, inter-office leased line (Figure 6-29) opens. Go
to step 9 on page 6-34.