User guide

Figure 3-7: Gateway Already Set dialog
You can choose whether you want the PC to use the AR100 series router as
its gateway or whether you want it to continue to use the device at the IP
address shown as its gateway. If you are unsure, contact your network
administrator or ISP.
6. Select whether or not to use the AR100 series router as the PC’s gateway,
and click
Next
. The “Domain Name Server dialog” on page 18 opens.
Figure 3-8: Domain Name Server dialog
If you use your router to access the Internet, your PC needs the IP address
of a Domain Name Server (DNS). If you do not access the Internet, you may
or may not need a DNS server to access your remote office. If you are
unsure, contact your network administrator. (The DNS server translates IP
domain names, for instance
alliedtelesyn.co.nz
, to IP addresses, for instance
123.456.78.9, so that data is sent to the right address.)
7. Select whether or not you need a Domain Name Server, and click
Next
. If
you need a Domain Name Server, the “Valid Domain Name Servers dialog”
on page 19 opens.