User guide

Getting Connected 3-17

Figure 3-5: Choosing an IP Address dialog

An “Initialising...” message shows under the IP Address title bar while the

wizard chooses a free IP address for the router. The IP address replaces this

when it is assigned.

4. Once an IP address shows beside the router’s serial number, click

. The

next dialog to open is either the “Gateway Not Set dialog” on page 17, the

“Gateway Already Set dialog” on page 18 or the “Domain Name Server

dialog” on page 18.

Figure 3-6: Gateway Not Set dialog

If you see this dialog box, then you probably want the PC to use the AR100

series router as its gateway. If there is another device connected to your PC

that you want to use as its gateway, then choose

. You may need to set the

other device as the PC’s gateway. If you are unsure, contact your network

administrator or ISP.

5. Select whether or not to use the AR100 series router as the PC’s gateway,

and click

. The “Domain Name Server dialog” on page 18

opens.