User guide

Chapter 10
Safety and Statutory Information
This information must be read prior to use of this equipment, and overrides as
appropriate any information in respect of connection and use of the equipment.
Any enquiries regarding regulatory aspects of this equipment should be
addressed to Allied Telesyn International. This product meets the requirements
of EN60950 1992 including amendments 1,2 and 3, AS3260 and Austel TS001.
1. Connection to Mains Voltage Supply
Products supplied for connection to mains voltage must only be used with the
supplied mains lead.
The wires in the mains lead are coloured in accordance with the following
code:
For continued protection against the risk of fire and shock hazard, replace fuses
only with the same type and rating.
2. Earthing
The power cord supplied with this equipment must be connected to a power
socket which provides a reliable protective earth connection.
3. Ports for the Connection of Other Apparatus
The following interfaces normally operate at SELV (Safe Extra Low Voltage)
levels:
■
Asynchronous (console) ports.
■
Hub ports.
NOTE: SELV is a voltage that does not exceed 42.4V peak a.c. or 60V d.c.
The following interfaces are Telecommunications Network Voltage (TNV)
circuits which operate normally within the limits of SELV:
■
BRI ports for connection to ISDN Basic Rate telecommunications networks.
GREEN and YELLOW EARTH
BLUE NEUTRAL
BROWN LIVE