User guide

Troubleshooting 9-121
Figure 9-8: dialog
■
Remove another device from your LAN by switching it off or
disconnecting it. Click
Continue
to try again.
No gateway address
Your PC needs the IP address of a valid gateway to access remote networks like
the Internet or your remote office. It is configured to get IP addresses
dynamically assigned to it by a DHCP server. The AR100 series router may be
running as a DHCP server. If this dialog appears, then your PC has been
assigned its own IP address, but has not been given a valid gateway address.
This mean that there is another DHCP server on your LAN in addition to the
router you are configuring, and that it does not supply a valid gateway
address.
Figure 9-9: No Gateway Address dialog
1. Either