User guide

Troubleshooting 9-119
Figure 9-5: Dynamic IP Address Assignment Failed dialog
■
Make sure that the router is connected to the power supply and is
switched on.
■
Make sure the Ethernet port on the PC is connected to the router, and click
Continue
.
■
If the problem persists, contact your router supplier.
No routers found
When the AR100 Series Access Wizard is started it searches for any AR100
series routers connected to the PC (or LAN). If it does not find any, this dialog
appears.
Figure 9-6: No Routers Found dialog
■
Make sure the router is connected to the PC and to the power supply, as
shown in the Start Here Guide, and that the router is switched on. Click
Continue
to try again.