User guide

9-116 AR100 Series Internet Router User Guide
No Ethernet card
The PC you use to configure the router uses an Ethernet adapter card to
communicate over the Ethernet. If this dialog appears, your PC does not have
an Ethertnet card correctly installed.
Figure 9-1: No Ethernet Card dialog box
■
If your PC does not have an Ethernet card, contact your PC supplier or use
another PC that has an Ethernet card.
■
To make sure the Ethernet adapter on your PC is correctly installed, follow
the steps below. You will need the name and manufacturer of you Ethernet
card, and if you have the installation disk for your Ethernet card, you may
need this too.
Follow these steps.
1. In the Windows
Start
menu, point to
Settings
and click the
Control Panel
.
2. In the Control Panel, double click the
Network
icon to display the Network
dialog box.
3. If your Ethernet adapter card appears in the configuration list then it is
installed, and you can close these dialogs.
If your Ethernet adapter card does not appear in the list of network
components, click
Add
to display the Select Network Component Type
dialog box.
4. Select
Adapter
and click
Add
to display the Select Network Adapters dialog
box.
5. Select your Ethernet adapter card’s manufacturer in the
Manufacturers
field and your Ethernet adapter card in the
Network Adapters
field. If you
have the installation disk, click
Have Disk
and follow the instructions
given. Otherwise click
OK
to save your changes. The Ethernet adapter card
appears in the Network dialog box Configuration list.
6. Click
OK
to close the Network dialog box. Click the
Close
button in the
Control Panel title bar to close the Control Panel.
7. Restart your PC.