User guide

Overview Log and Trap Listing by Reason Code
Log Reference for SBx3100 and iMAP Series Switches (Allied Telesis Product Logs with
Traps)
3-40
2.26.5 Enable Failed
Message Port Fault Set
Severity Info
Explanation The port failed to respond to an enable request. It could be due to
high traffic through the card, or a problem with provisioning asso-
ciated with the port.
Action Perform the following:
1. Verify traffic capacity.
2. Verify load preferences.
3. Verify provisioning.
Alarms The following components are affected:
Component Status Alarm
• ADSL Port Failed Info
• DS1 Port Failed Major
• E1 Port Failed Major
• EPON Port Failed Major
• FE Port Failed Major
• FX Port Failed Major
• GE Port Failed Major
• POTS Port Failed Info
• SHDSL Port Failed Info
• XE Port Failed Major
2.26.6 Loss of Frame (LOF)
Message Port Fault Set
Severity Major
Explanation The port has lost the framing source from the far end equipment
Action Perform the following:
1. Verify framing source.
2. Verify far-end equipment.
3. Disable/enable the port.
Alarms The following components are affected:
Component Status Alarm