User guide

Overview Log and Trap Listing by Reason Code
Log Reference for SBx3100 and iMAP Series Switches (Allied Telesis Product Logs with
Traps)
3-34
Component Status Alarm
• None
2.22 INTF003 - (no Trap Message)
2.22.1 Classifier Configuration Failed
Message Interface Degradation Set
Severity Info
Explanation The reported interface has rejected the provisioned classifier con-
figuration for an unspecified reason. CLASSIFIER and/or ACCESSLIST
functionality may not behave correctly.
Action Perform the following:
1. Verify classifier provisioning.
2. Disable and enable the interface.
3. Disable and enable the card.
4. If the problem still exists, contact Allied Telesis Support.
Alarms The following components are affected:
Component Status Alarm
• ATMBOND Degraded Info
• ONU Degraded Info
• PPP Degraded Minor
2.22.2 Classifier Configuration Not Supported
Message Interface Degradation Set
Severity Info
Explanation The reported interface is not capable of supporting the provisioned
classifier configuration. This may be due to the reported card run-
ning an older software revision. CLASSIFIER and/or ACCESSLIST func-
tionality may not behave correctly.
Action Perform the following:
1. Verify software release running in the associated card.
2. Verify classifier provisioning.
3. Disable and enable the interface.
4. Disable and enable the card.
5. If the problem still exists, contact Allied Telesis Support.