User guide

Overview Log and Trap Listing by Reason Code
Log Reference for SBx3100 and iMAP Series Switches (Allied Telesis Product Logs with
Traps)
3-26
Alarms The following components are affected:
Component Status Alarm
• None
2.7 CFCP002 - atnRedundancyRestored
2.7.1 Unknown
Message Shelf Operating in duplex CFC mode
Severity Info
Explanation The system, configured for duplex mode, has restored the inactive
control module to service as hot standby. Both control modules are
in sync and redundant operation is restored.
Explanation
Action Perform the following:
1. To B e S u p p l e d
Alarms The following components are affected:
Component Status Alarm
• None
2.8 CFCP014 - atnEpsrNodeTrap
2.8.1 Not Applicable
Message (N/A)
Severity Master Node EPSR State Change
Explanation In an EPSR ring configuration, the master Node has undergone a
state change. Possible states are: Idle, Completed, Failed.
Action Perform the following:
1. No action is required.
Alarms The following components are affected:
Component Status Alarm
• None