User guide

Log and Trap Listing by Reason Code Overview
3-25
Log Reference for SBx3100 and iMAP Series Switches (Allied Telesis Product Logs with
Traps)
Explanation The inactive Control Module has reached online status, but the data
service protocols have not yet synchronized, therefore the system
is not ready to support a swap of activity.
Action Perform the following:
1. No action is required.
Alarms The following components are affected:
Component Status Alarm
• CFC200 Online Info
• CFC24 Online Info
• CFC6 Online Info
2.5 CARD043 - Not Applicable
2.5.1 Not Applicable
Message Restart requested by OAM Audit Task
Severity Info
Explanation A routine audit process has discovered a card that is administra-
tively enabled but in a failed operational state. The audit has
initiated a restart on the card in an attempt to restore it to ser-
vice.
Action Perform the following:
1. To B e S u p p l i e d
Alarms The following components are affected:
Component Status Alarm
• None
2.6 CFCP001 - atnRedundancyLost
2.6.1 Not Applicable
Message Shelf Operating in simplex CFC mode
Severity Info
Explanation The system, configured for duplex mode, has dropped out of sync and
is operating in the simplex mode.
Action Perform the following:
1. If this is expected, no action is required.