User guide

Log and Trap Listing by Reason Code Overview
2-3
Log Reference for SBx3100 and iMAP Series Switches (SBx3112 Logs with Traps)
2.1 CARD005 - atnCardDefectRaised
2.1.1 1.0v Power Failed
Message Card Failure Raised
Severity Critical
Explanation A problem has been detected with the 1.0v power output on the
CFC200, affecting data packet processing. The CFC200 card is proba-
bly defective.
Action Perform the following:
1. Replace the CFC card. If the problem is still not resolved, con-
tact Allied Telesis Support.
PORT003 - atnPortDefectRaised Insufficient Shelf PoE Power
PD Overload
PD Short Circuit
PD Thermal Protection
PD Underload Detected
POE Device Fault
PORT005 - atnPortDefectRaised Insufficient Card PoE Power
MAC Thrashing Limit Exceeded
PSU001 - atnPSUFaultRaised PSU Card Not Present
PSU General Fault
PSU Hardware Not Recognized
PSU High Temperature
PSU Input Voltage Fault
PSU No Communication
PSU Output Voltage Fault
SHLF001 - atnShelfFaultRaised POE Usage Exceeds Power Threshold
TABLE 2-1 Logs and Traps for the SBx3112
Log and Trap Text Reason Code