User guide

Status Poll Cannot complete backup
Log Reference for SBx3100 and iMAP Series Switches (NMS Logs)
5-4
Severity Major
Explanation If problem persists call Allied Telesis NMS support.
4.7 Cannot complete backup
Message NMS Backup Failure -- Database backup could not be completed (Check
DB table sizes and see log for details)
Severity Warning
Explanation Check the database table sizes and see logs for details
4.8 Cannot create directory for directory copy
Message NMS Backup Failure -- Unable to create directory path needed for
directory copy (from -source- to -destination-)
Severity Warning
Explanation If problem persists call Allied Telesis NMS support.
5 Status Poll
5.1 At least one Node in failure state
Message At least one node in this network is in failure state
Severity Major
Explanation Check the Alarm view to see which device is affected. Then go to
the Physical View and perform a View Chassis as well as a right
click to select Alarms and Events. Go to the System Log Events view
and sort by Source. Look at the associated logs and refer again to
this Log Manual.
5.2 Interface Failure
Message Interface Failure. Status Poll Failed
Severity Major
Explanation Check the Failure Object in the Alarm view to see which device is
affected. Then go to the Physical View and perform a View Chassis,
since this may mean a port is down. Right click on the device and
select Alarms and Events. Go to the System Log Events view and sort
by Source. Look at the associated logs and refer again to this Log
Manual.
5.3 Node Failure
Message Node Failure. This probably means one or more interfaces have
failed.