User guide

Log and Trap Listing by Reason Code Overview
4-63
Log Reference for SBx3100 and iMAP Series Switches (iMAP Logs with Traps)
1. Reset the OLT (enable/disable).
Alarms The following components are affected:
Component Status Alarm
• EPON Port Failed Major
2.29.19 Registration Failed
Message Port Fault Set
Severity Info
Explanation The registration failure alarm is set when a POTS PORT loses its
registration status with the call agent, signaling that a port is
out of service. The fault is cleared when the registration is
restored.
Action Perform the following:
1. To B e S u p p l i e d
Alarms The following components are affected:
Component Status Alarm
• POTS Port Failed Minor
2.29.20 DS3 Out of Service
Message Port Fault Set
Severity Major
Explanation The GE port is using DS3 SFP and the associated DS3 is provisioned,
but the DS3 is failed.
Action Perform the following:
1. To B e S u p p l i e d
Alarms The following components are affected:
Component Status Alarm
• None
2.30 PORT005 - HDSL2SHDSLPERFLOSWSTHRESH
2.30.1 Loss Of Sync Word
Message Port Fault Set
Severity Info