User guide

Overview Log and Trap Listing by Reason Code
Log Reference for SBx3100 and iMAP Series Switches (iMAP Logs with Traps)
4-48
alarm from occurring due to mis-configuration. Therefore, presence
of this alarm should be rare.
Action Perform the following:
1. Disable/enable the ONU.
2. Disable/enable the EPON interface.
3. Disable/enable the EPON card.
4. Power reset the ONU.
5. Replace the ONU.
6. Replace the EPON card.
Alarms The following components are affected:
Component Status Alarm
• ONU Degraded Info
2.22.5 Mismatched ONU Type
Message To Be Supplied
Severity Info
Explanation The ONU is pre-provisioned as either TK3711 or TK3713, but the ONU
physically plugged in to the EPON is the other type.
Action Perform the following:
1. To B e S u p p l i e d .
Alarms The following components are affected:
Component Status Alarm
• ONU Degraded Info
2.22.6 Unsupported ONU Type
Message To Be Supplied
Severity Info
Explanation ONU is pre-provisioned as either TK3711 or TK3713, but the ONU
physically plugged into the EPON is neither type.
Action Perform the following:
1. To B e S u p p l i e d .
Alarms The following components are affected:
Component Status Alarm
• ONU Degraded Info