User guide

Log and Trap Listing by Reason Code Overview
4-43
Log Reference for SBx3100 and iMAP Series Switches (iMAP Logs with Traps)
Component Status Alarm
• ONU Failed Info
2.20.16 All ASM Links Down
Message Interface Fault Set
Severity Info
Explanation The ATMBOND is failed because all of the internal links for commu-
nicating Asynchronous Status Messages (ASM) are not functioning.
Resolving this problem may involve any one or combination of the
action listed below.
Action Perform the following:
1. Reset the G.bond modem at the CPE.
2. Disable/Enable the ATMBOND.
3. Disable/Enable the individual ADSL interfaces in the ATMBOND group.
Alarms The following components are affected:
Component Status Alarm
• ATMBOND F a i le d Info
2.20.17 All Parent Interfaces Down
Message Interface Fault Set
Severity Info
Explanation The ATMBOND group is failed because all of the ADSL interfaces in
the group are either failed or disabled.
Action Perform the following:
1. To B e S u p p l i e d .
Alarms The following components are affected:
Component Status Alarm
• ATMBOND Failed Info
2.20.18 Loss of Signal (LOS)
Message Interface Fault Set
Severity Major
Explanation A Loss of Signal condition has been detected on the DS3.
Action Perform the following: