SwitchBlade Series x3100 Software Version 14.2.1 Release Notes Issue 1.0 Copyright © 2010 Telesis, Inc. All rights reserved Information in this document is subject to change without notice.
Table of Contents 1 2 3 4 5 6 0BPurpose.................................................................................................................................... 3 1BMajor New Features (Release 14.2)........................................................................................ 3 2.2 6BHardware Support: .......................................................................................................... 3 2.3 7BSoftware Features: ...................................................
1 Purpose 0B This document provides a summary of known issues and workarounds for the SwitchBlade x3112 Software Release Version 14.2.1. Along with this document, three other document types are available: the SBx3112 Software Reference Manual, the SBx3112 Hardware Installation Guide, and the Allied Telesis Log Manual. Please refer to those documents for specific information regarding functionality, administration, and installation of this Telesis product. 2 Major New Features (Release 14.
2.5 • Commands to support the GE24POE 24-port 10/100/1000M PoE line card • Commands to support the GE24SFP 24-port 1G SFP line card • Commands to support Port Authentication • Commands to support PoE features Modified Commands: 9B • Removed the GATEWAY, DOMAINNAME, and DNS settings from the SET/ADD IP INTERFACE commands. These are exclusively system settings now on the CFC200. • Moved LAG Hash Selection criteria from the LAG interface (e.g.
4 Known Issues in Release 14.2.1 3B The heading Level refers to the level of service affected: • • • 1: Service Disruption 2: Disruption, but Workaround 3: Inconvenience PR Level Title Description 22505 3 Security Officer warning banner improperly formatted with SSH Login When user logs in to system by SSH, then the Security Officer warning banner may be displayed with improper formatting. The intent of the message is still clear, but it looks untidy.
PR Level Title Description 21618 3 Missing PSU shows actual temp value.
5 Issues Resolved in this Release (14.2.1) The heading Level refers to the level of service affected before the issue was resolved. • • • 1: Service Disruption 2: Disruption, but Workaround 3: Inconvenience PR Level Title Description 22321 2 MSTP BPDU gets corrupted when changing priority 22320 1 MSTP may not prevent loops in certain network topologies. 22318 3 Invalid data generated for SHOW STP INSTANCE when running MSTP.
PR Level Title Description 21540 3 MAC Thrashing limits are not visible to the user 21538 3 21501 3 21491 3 21412 2 21260 2 21053 2 Continuously repeated movement of L2 MAC+VID Addresses to different ports will disable traffic on the port to protect the system from overload. However, this action currently does not affect port operational state nor generate a Management Log. This has been fixed in 14.2.0. Customer documents explain the log (PORT005) and status (degraded).
PR Level Title Description 20681 3 Redundant Counter history entries in text config output 20360 3 Network interruption hangs FTP 18891 3 DELETE CLASSIFIER INTERFACE=ALL does not remove classifier from LAG interfaces 18859 3 MSTP: Root Bridge ID MAC shown as all zeros 18850 3 Superfluous ADD INTERFACE ... COUNTER HISTORY commands appear in text config output INTERVAL=300 BUCKETS=33 Erroneous entries appear in the text config output after COUNTER HISTORY commands have been run.
6 Issues Resolved in Previous Releases The heading Level refers to the level of service affected before the issue was resolved. • • • 1: Service Disruption 2: Disruption, but Workaround 3: Inconvenience Release PR Level Title Description 14.2.0 22064 2 GE24POE: Manual per-port power limit is 34.7W rather than 40W 14.2.0 21809 3 Quickly learning an excessive volume of MAC addresses can lead to incomplete FDB. 14.2.0 21776 3 PSU mismatch causes erroneous PoE Power 14.2.
Release PR Level Title Description 14.2.0 21713 3 UFO and Egress VLAN Translation do not work together 14.2.0 21619 3 Adding a link to a lag does not apply the LAG's classifiers/ACLs to the new member link 14.2.0 21540 3 MAC Thrashing limits are not visible to the user 14.2.0 21538 14.2.0 21501 3 POE Underload alarm when cable unplugged 14.2.0 21491 3 STP_ORIG mode does not work with LAG 14.2.
Release PR Level Title Description 14.2.0 21260 2 Cannot filter IPv6 packets based on L4 fields (e.g. UDP/TCP port #) 14.2.0 21053 2 Links with different DIRECTION settings are allowed in the same LAG 14.2.0 20681 3 Redundant Counter history entries in text config output 14.2.0 20360 3 Network interruption hangs FTP 14.2.
Copyright © 2010 Telesis, Inc. All rights reserved Information in this document is subject to change without notice.