User's Manual

16 AT-WR2304N - IEEE 802.11b/g/n, Small Business Wireless Router - Installation Guide
Figure 7: Connecting the Power Adapter
Verify that the Power LED is orange. If the LED is off, refer to Chapter 3, “Troubleshooting”. 2.
The router is now powered on and ready for the first configuration.
First Configuration
Before using the device correctly, you must process first configuration. Please perform the following
procedure:

Note
:
For firewall and anti
-
virus
programs
might
interrupt
the
configuration
, we suggest turning
those programs off temporarily until the end of the first configuration.
Open a browser (e.g. Internet Explorer) and enter IP address 192.168.1.1. 1.
You are prompted for a username and password. The default user name is “manager” and the default 2.
password is “friend”, as shown in Figure 8. Then click on OK.
Figure 8: Login Dialog Box
Click on “Wizard” on the left side, as shown in Figure 9. 3.