User's Manual

AT-WR2304N IEEE 802.11b/g/n, Small Business Wireless Router Installation Guide 15
Figure 5: Attaching the LAN Cable
Connecting the Wireless Router to the WAN
To connect the AT-WR2304N IEEE 802.11b/g/n, Small Business Wireless Router to the WAN, perform the
following procedure:
Locate another RJ45 cable, which usually is with modem. 4.
Connect one end of the cable to a modem or an existing network. 5.
Connect the other end of the cable to WAN port on the back of the router, as shown in 6.
Figure 6.
Figure 6: Attaching the WAN Cable
Powering On the Router
To power on the router, perform the following procedure:
Warning
:
Do not work on equipment or cables during
periods of lightning activity.
Warning
:
Power
adapter
is used as a disconnection device. To de
-
energize equipment,
disconnect the power adapter.
Plug the power adapter on the back panel, as shown in Figure 7, and plug the power adapter into a wall 1.
outlet.