Installation Guide
Table Of Contents
- Contents
- Preface
- Chapter 1
- Chapter 2
- Installing the Access Point
- Reviewing Safety Precautions
- Unpacking the Access Point
- Attaching the Ground Cable to the Access Point
- Connecting the Access Point with the Ethernet Cable
- Attaching the Antennas to the Access Point
- Installing the Access Point on a Wall
- Installing the Access Point on a Pole
- Starting the Initial Management Session on the Access Point
- Setting the Country Setting
- Installing the Access Point
- Appendix A
Appendix A: Technical Specifications and Statements
55
Europe - EU Declaration of Conformity
Hereby, Allied Telesis declares that the radio equipment type
[AT-TQ5403e] is in compliance with Directive 2014/53/EU.
Operating
Frequencies and
Maximum
Transmission
Power Levels
The operating frequencies and maximum transmission power levels for
wireless devices operated in the EU are listed below:
Non-Beamforming:
- 2412-2472 MHz: 19.07 dBm (80.81mW)
- 5180-5240 MHz: 22.43 dBm (174.82mW)
- 5260-5320 MHz: 22.52 dBm (178.79mW)
- 5500-5700 MHz: 29.12 dBm (817.50mW)
Beamforming:
- 2412-2472 MHz: 19.16 dBm (82.44mW)
- 5180-5240 MHz: 22.32 dBm (170.75mW)
- 5260-5320 MHz: 22.75 dBm (188.33mW)
- 5500-5700 MHz: 29.05 dBm (803.06mW)
Draft 5 on February 14, 2019