Installation Guide
Table Of Contents
- Contents
- Preface
- Chapter 1
- Chapter 2
- Installing the Access Point
- Reviewing Safety Precautions
- Unpacking the Access Point
- Attaching the Ground Cable to the Access Point
- Connecting the Access Point with the Ethernet Cable
- Attaching the Antennas to the Access Point
- Installing the Access Point on a Wall
- Installing the Access Point on a Pole
- Starting the Initial Management Session on the Access Point
- Setting the Country Setting
- Installing the Access Point
- Appendix A
47
Appendix A
Technical Specifications and Statements
This appendix contains the following sections:
“Physical Specifications”
“Power Specifications”
“Environmental Specifications” on page 48
“Antenna Specifications” on page 48
“LAN Port” on page 49
“Safety and Electromagnetic Emissions Certifications” on page 51
“Operation Frequency Information” on page 52
“IC Statements” on page 53
“Europe - EU Declaration of Conformity” on page 55
Physical Specifications
Power Specifications
Table 5. AT-TQ5403e Physical Specifications
Dimensions (W x D x H) 260 mm x 230 mm x 85 mm
(8.6 in. x 9.8 in. x 2.2 in.)
Weight of the device
Weight of the device with antennas
Weight of the device with antennas
and wall mount
2.8 kg (6.2 lb.)
4.o kg (8.8 lb.)
4.4 kg (9.7 lb.)
Table 6. AT-TQ5403e Maximum Power Consumption
AT-TQ5403e 15.8 watts
Draft 5 on February 14, 2019