Installation Guide
Table Of Contents
- Contents
- Preface
- Chapter 1
- Chapter 2
- Installing the Access Point
- Reviewing Safety Precautions
- Unpacking the Access Point
- Attaching the Ground Cable to the Access Point
- Connecting the Access Point with the Ethernet Cable
- Attaching the Antennas to the Access Point
- Installing the Access Point on a Wall
- Installing the Access Point on a Pole
- Starting the Initial Management Session on the Access Point
- Setting the Country Setting
- Installing the Access Point
- Appendix A
AT-TQ5403e Outdoor Wireless Access Point Installation Guide
14
Overview
The AT-TQ5403e access point is an enterprise-class outdoor wireless
access point designed to expand wireless networks to outdoor venues,
such as ski and beach resorts, sports arenas, or college and corporate
campuses.
The access point comes with one PoE+ capable LAN port to connect to
the network as well as the power supply.
This device can be mounted on a wall or pole.
The AT-TQ5403e access point is illustrated in Figure 1.
Figure 1. AT-TQ5403e Access Point
The front panel components of the AT-TQ5403e access point are
illustrated in Figure 2.
Figure 2. AT-TQ5403e Access Point Antenna Front Panel
LAN Port
5GHz Antenna
Connector
5GHz Antenna
Connector
LEDs and Reset Button
Draft 5 on February 14, 2019