User's Manual
Table Of Contents
- Contents
- Preface
- Chapter 1
- Chapter 2
- Chapter 3
- Installing the Access Point
- Reviewing Safety Precautions
- Unpacking the AT-TQ4400e Access Point
- Optional Antennas
- Attaching the Ground Cable to the Access Point
- Connecting the Access Point with the Ethernet Cable
- Installing the Access Point on a Wall
- Installing the Access Point on a Pole
- Attaching the Antennas to the Access Point
- Starting the Initial Management Session on the Access Point
- Setting the Country Setting
- Installing the Access Point
- Chapter 4
- Appendix A
- Appendix B
AT-TQ4400e Outdoor Wireless Access Point Installation Guide
27
Electrical Specifications
Table 9 shows the electrical specifications for the Sector Antenna.
Mechanical Specifications
Table 10 shows the mechanical specifications for the Sector Antenna.
Table 9. Electrical Specifications for the Sector Antenna
Item Value
Frequency Range 5150-5850 MHz
Gain 16 dBi
Polarization Vertical and Horizontal (Dual)
Maximum Voltage Standing Wave
Ratio (VSWR)
<1.8
Horizontal Beamwidth (-6 dB) 120°
Vertical Beamwidth (-6 dB) 11°
Front to Back Ratio > 25 dB
Port to Port Isolation < -28 dB
Maximum Input Power 100 watts
Input Impedance 50Ohm
Lightning Protection DC Ground
Table 10. Mechanical Specifications for the Sector Antenna
Item Description
Connector Interface N-Female x 2
Rated Wind Velocity 130 mph (210 km/h)
Vertical Tilt 0-17°
Dimensions 31.3 x 4.5 x 2.5 in. (795 x 115 x 65 mm)
Weight including
Bracket
6.0 lbs (2.75 kg)
Mounting Mast Size
(diameter)
1.2 to 2.0 in. (30 -50 mm)
RoHS Compliant Yes
Draft 4 on November 9, 2017