User's Manual
Table Of Contents
- Contents
- Preface
- Chapter 1
- Chapter 2
- Chapter 3
- Installing the Access Point
- Reviewing Safety Precautions
- Unpacking the AT-TQ4400e Access Point
- Optional Antennas
- Attaching the Ground Cable to the Access Point
- Connecting the Access Point with the Ethernet Cable
- Installing the Access Point on a Wall
- Installing the Access Point on a Pole
- Attaching the Antennas to the Access Point
- Starting the Initial Management Session on the Access Point
- Setting the Country Setting
- Installing the Access Point
- Chapter 4
- Appendix A
- Appendix B
Chapter 2: Optional Antennas and Cables
26
AT-AN5158-
16DP Sector
Antenna
The AT-AN5158-16DP Sector Antenna combines vertical and horizontal
polarization with high gain over a broadband frequency in a single
enclosure. See Figure 5.
Figure 5. AT-AN5158-16DP Sector Antenna
The Sector Antenna is supplied with a stainless steel tilt and swivel mast
mount kit. It allows the antenna to be mounted to a 1.2 inch (30 mm) to
2.0” (50 mm) diameter mast and adjusted tilt from 0° to 17°. See Figure 6.
Figure 6. AT-AN5158-16DP Sector Antenna Adjustment
Features
All weather operations
Dual polarity feed system in single enclosure
MIMO: Multiple Input and Multiple Output
Draft 4 on November 9, 2017