User's Manual
Table Of Contents
- Contents
- Preface
- Chapter 1
- Chapter 2
- Chapter 3
- Installing the Access Point
- Reviewing Safety Precautions
- Unpacking the AT-TQ4400e Access Point
- Optional Antennas
- Attaching the Ground Cable to the Access Point
- Connecting the Access Point with the Ethernet Cable
- Installing the Access Point on a Wall
- Installing the Access Point on a Pole
- Attaching the Antennas to the Access Point
- Starting the Initial Management Session on the Access Point
- Setting the Country Setting
- Installing the Access Point
- Chapter 4
- Appendix A
- Appendix B
AT-TQ4400e Outdoor Wireless Access Point Installation Guide
25
Electrical Specifications
Table 7 shows the electrical specifications for the Mini Panel Antenna.
Mechanical Specifications
Table 8 shows the mechanical specifications for the Mini Panel Antenna.
Table 7. Electrical Specifications for the Mini Panel Antenna
Item Value
Frequency Range 2400-2500/4900-5850 MHz
Gain 8 dBi@2.4 GHz / 10 dBi@4.9-5.8 GHz
Polarization Vertical and Horizontal
Vertical Beamwidth 57° @2.4 GHz / 42° @4.9-5.8 GHz
Horizontal Beamwidth 90° @2.4 GHz / 70° @4.9-5.8 GHz
Maximum Power 50 watts
Impedance 50 Ohm
Isolation > 28 dB
Voltage Standing Wave
Ratio (VSWR)
< 2.0 (V-Pol) / < 2.3 (H-Pol)
Front to Back Ratio ≥15 dB
Lightning Protection DC Ground
Table 8. Mechanical Specifications for the Mini Panel Antenna
Item Description
Connectors 2 Integral N-Female
Mounting 1 to 1.7 in. (25.4 to 43.2 mm) diameter mast
Vertical Tilt 0-30
Radome Material UV-Protected ABS
Dimensions 4 x 4 x 3.5 in.(104 x 104 x 90 mm)
Antenna Weight 1.1 lbs (0.5kg)
Mounting Bracket Weight 0.4 lbs (0.18 kg)
Operating Temperature
-40° C to 60° C (-40° F to 131° F)
Rated Wind Velocity 130 mph/h (210 km/h)
RoHS Compliant Yes
Draft 4 on November 9, 2017