User's Manual
Table Of Contents
- Contents
- Figures
- Tables
- Preface
- Chapter 1
- Overview
- Chapter 2
- Installing the Access Point
- Appendix A
- Technical Specifications
- Appendix B
- Regulatory Statements
AT-TQ3600 Wireless Access Point Installation Guide
37
Removing the
Bottom Panel
from the Access
Point
To remove the bottom panel from the access point, preform the following
procedure:
1. Place the access point on a table or desk.
2. Open the front panel. Refer to Figure 13.
Figure 13. Opening Front Panel
3. Use a #2 Phillips-head screwdriver to loosen the captive screw that
secures the bottom panel to the wireless access point. Refer to Figure
14 on page 38.
Review Draft - January 24, 2014