User's Manual

Chapter 2: Installing the Access Point
44
5. Secure the top panel and access point to the bottom panel by
tightening the two captive screws on the top panel. Refer to Figure 22.
Figure 22. Tightening the Screws to Secure the Top Panel and Access
Port to the Bottom Panel
6. Install the three 2.4 GHz and three 5 GHz antennas to the
corresponding connectors on the sides of the unit. The connectors are
labelled. Refer to Figure 23 on page 45.
CONSOLE PORT
RESET
5GHz
RESET
2.4GHz
LAN
10BASE-T/100BASE-TX/1000BASE-T
(AUTO MDI/MDI-X)
PoE I N
12VDC
2.4GHz
5GHz
Screws
Review Draft - March 18, 2012