Installation Guide

Appendix A: Technical Specifications
48
Cable Specifications
The AT-TQ1402 Series Access Point Ethernet cable requirements for the
LAN ports are listed in Table 9.
Note
The maximum operating distance of these cables is 100 meters
(328 feet).
Table 9. LAN Port Twisted Pair Cable Requirements
Cable Type
10 Mbps 100 Mbps 1000 Mbps
PoE PoE PoE
Standard TIA/EIA 568-A-compliant
Category 5 shielded or unshielded
cabling with 100 ohm impedance and
100 MHz frequency.
Yes Yes No
Standard TIA/EIA 568-B-compliant
Enhanced Category 5 (Cat 5e) shielded
or unshielded cabling with 100 ohm
impedance and 100 MHz frequency.
Yes Yes Yes
Standard TIA/EIA 568-B-compliant
Category 6 or 6a shielded cabling.
Yes Yes Yes