Installation Guide

Appendix A: Technical Specifications
46
Power Specifications
Input Power
Specifications
The power specifications for the AT-TQ1402 Series Access Point are
given in Table 6.
External Power
Supply
Specifications
The external power supply must be capable of powering the
AT-TQ1402 Series Access Point by meeting the specifications given in
Table 7.
Note
Allied Telesis recommends using the AT-MWS0091 (WA-24Q12R)
external AC/DC power supply with the AT-TQ1402 Series Access
Point. This power supply is a UL Listed power supply and is fully
compatible with the above specifications while meeting the
standards of a SELV.
Table 6. Input Power Specifications
Parameter Specification
Rated Input Voltage 12 VDC
Maximum Input Current 0.7 A
Average Input Current 0.52 A
Table 7. External Power Supply Specifications
Parameter Specification
Input Voltage Range 90 to 264 V
Input Frequency 47 to 63 Hz
Rated Output Voltage 12 VDC ±5%
Rated Output Current 2 A
Temperature Range 0° C to 45° C (32° F to 113° F)
Maximum Operating Altitude 3000 m (9843 ft)