Installation Guide

AT-TQ1402 Series Wireless Access Point Installation Guide
39
5. Secure the physical position of the mounting bracket by pre-drilling
holes through the two existing open bracket mounting holes in the
opposite corners from the key-hole slots. Refer to the arrows in
Figure 10.
Figure 10. Pre-Drill Holes for Mounting Bracket
6. Install and tighten two M4 screws (not provided) in the holes prepared
in Step 5. The physical position of the bracket is now stationary. Refer
to Figure 11.
Figure 11. Stationary Bracket Position
7. Go to the next procedure - ”Install Ethernet Cable and External DC
Power Supply”.
4437
4441
Ceiling
Wall
4442
4439
Ceiling
Wall