Installation Guide

Chapter 2: AT-TQ1402 Series Wireless Access Point Installation
32
Unpack Shipping Box Contents
To unpack the AT-TQ1402 Series Access Point from the shipping box,
perform the following procedure:
1. Remove all components from the shipping box.
Note
Store the packaging material in a safe location so that if you need to
return the unit to Allied Telesis, you will have the original shipping
material available.
2. Verify that all components listed in Table 3 are included in your
shipping box. If any item is missing or damaged, contact your Allied
Telesis sales representative for assistance.
Table 3. Shipping Box Components
Name Component
AT-TQ1402 Series Access
Point
1 ea RJ-45 Dust Cap
(for Console port)
1 ea Mounting Bracket
2 ea Screws for the Chassis
(M5 x 8mm, Pan-head)
4680
PWR
AT-TQ1402
2.4GHz 5GHz
LAN
4417