Owner manual
SwitchBlade x3106 Installation Guide
247
Figure 171. Removing the AT-SBxFAN06 Fan Module from the Chassis
Installing a New
AT-SBxFAN06
Fan Module
This procedure assumes that you have already removed the old fan
module from the chassis and are continuing directly from the previous
procedure, “Removing the AT-SBxFAN06 Fan Module” on page 244. To
install the new fan module, perform the following procedure
1. Orient the new module with the LED and module name on top and
carefully slide the module into the slot in the chassis. Refer to Figure
172 on page 248.