Owner manual

SwitchBlade x3106 Installation Guide
147
Note
If you are ready to attach the fiber optic cable to the transceiver,
continue with the next step. Otherwise, repeat steps 1 to 3 to install
the remaining SFP transceivers in the line cards.
4. Remove the protective cover from the SFP transceiver, as shown in
Figure 100.
Figure 100. Removing the Dust Cover from an SFP+ Transceiver in the
AT-SBx31XS6 Line Card
Note
The dust cover protects the fiber optic port on the SFP transceiver
from dust contamination. It should not be removed until you are
ready to connect the fiber optic cable.