Owner manual

SwitchBlade x3106 Installation Guide
123
Figure 78. Tightening the Thumb Screws on the AT-SBx31CFC Card
10. Tighten the screws with a # 2 Phillips-head screwdriver to secure the
control card to the chassis.
Allied Telesis recommends tightening the screws to 5 inch-lbs.
11. if you have a second AT-SBx31CFC Controller Fabric Card, repeat
steps 1 to 9 to install it in the chassis.
12. Go to “Installing the Ethernet Line Cards” on page 124.