user manual
Table Of Contents
- Contents
- List of Figures
- List of Tables
- Preface
- Section I
- Getting Started
- Chapter 1
- Chapter 2
- System Configuration
- System Management Information
- Configuration of IP Address, Subnet Mask and Gateway Address
- IP Access List Configuration
- User Name and Password Configuration
- User Interface Configuration
- System Time
- SSL Settings
- DHCP and ATI Web Discovery Tool
- DHCP Client Configuration
- DHCP Auto Configuration
- System Information Display
- System Log Configuration
- System Configuration
- Section II
- Section III
- Advanced Features
- Chapter 16
- Chapter 17
- Chapter 18
- Chapter 19
- Chapter 20
- Chapter 21
- Chapter 22
- Chapter 23
- Chapter 24
- Chapter 25
- Section IV
- Appendix A
- Appendix B
Chapter 5: Multiple Spanning Tree Protocol
84
Forward Delay - The Forward Delay defines the time that the
bridge spends in the listening and learning states. Its range is
4 - 30 seconds.
Maximum Hop Count - The Maximum Hop Count is a parameter
set in a BPDU packet when it originates. It is decremented by 1
each time it is retransmitted by the next bridge. When the Hop
Count value reaches zero, the bridge drops the BPDU packet. Its
range is 6 - 40 hops.
Transmit Hold Count - The Transmit Hold Count specifies the
maximum number of BPDUs that the bridge can send per second.
Its range is 1 - 10.
5. Once you have configured the parameters, click Apply.
6. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.