user manual
Table Of Contents
- Contents
- List of Figures
- List of Tables
- Preface
- Section I
- Getting Started
- Chapter 1
- Chapter 2
- System Configuration
- System Management Information
- Configuration of IP Address, Subnet Mask and Gateway Address
- IP Access List Configuration
- User Name and Password Configuration
- User Interface Configuration
- System Time
- SSL Settings
- DHCP and ATI Web Discovery Tool
- DHCP Client Configuration
- DHCP Auto Configuration
- System Information Display
- System Log Configuration
- System Configuration
- Section II
- Section III
- Advanced Features
- Chapter 16
- Chapter 17
- Chapter 18
- Chapter 19
- Chapter 20
- Chapter 21
- Chapter 22
- Chapter 23
- Chapter 24
- Chapter 25
- Section IV
- Appendix A
- Appendix B
AT-GS950/48PS Switch Web Interface User’s Guide
385
Configuration File
Upload/Download via
HTTP
Select File
none -
Configuration File
Upload/Download via
TFTP
TFTP Server IP
0.0.0.0 IPv4 address in xxx.xxx.xxx.xxx hex format;
except 127.0.0.1
Configuration File
Upload/Download via
TFTP
Config File Name
none 1 - 39 characters (special characters are
dependent on OS file name limitation)
Cable Diagnostics
Port
1 ports 1 - 48
LED ECO Mode Disable Enable/Disable
Reboot
Factory Default Reset
Enable Enabled/Disabled
Reboot selection Normal Normal/Factory Default/Factory Default Except
IP
Ping - Destination IP
Address
0.0.0.0 IPv4 address in xxx.xxx.xxx.xxx hex format
Ping - Timeout Value 3 seconds 1 - 5 seconds
Ping - Number of Ping
Requests
10 1 - 10 times
Table 12. AT-S111 Management Software Default Settings (Continued)
Parameter
AT-GS950/48PS
Default Setting
Specifications