user manual
Table Of Contents
- Contents
- List of Figures
- List of Tables
- Preface
- Section I
- Getting Started
- Chapter 1
- Chapter 2
- System Configuration
- System Management Information
- Configuration of IP Address, Subnet Mask and Gateway Address
- IP Access List Configuration
- User Name and Password Configuration
- User Interface Configuration
- System Time
- SSL Settings
- DHCP and ATI Web Discovery Tool
- DHCP Client Configuration
- DHCP Auto Configuration
- System Information Display
- System Log Configuration
- System Configuration
- Section II
- Section III
- Advanced Features
- Chapter 16
- Chapter 17
- Chapter 18
- Chapter 19
- Chapter 20
- Chapter 21
- Chapter 22
- Chapter 23
- Chapter 24
- Chapter 25
- Section IV
- Appendix A
- Appendix B

Appendix B: AT-GS950/48PS Default Parameters
384
Traffic Comparison
Statistics
Inbound Octet Rate (Bytes/
s)
25 statistics
Traffic Comparison
Auto Refresh
5 seconds 5/10/15/30 seconds
Traffic Comparison
Color
Green 12 colors
Error Group
Port
1
ports 1 - 48
Error Group
Auto Refresh
5 seconds 5/10/15/30 seconds
Error Group
Color
Green 12 colors
Historical Status
Statistics
Inbound Octet Rate (Bytes/
s)
12 statistics
Historical Status
Auto Refresh
5 seconds 5/10/15/30 seconds
Historical Status
Port
1
ports 1 - 48
Historical Status
Color
Green 12 colors
Tools
Firmware Upgrade via
HTTP
Firmware File
none -
Firmware Upgrade via
TFTP
TFTP Server IP
0.0.0.0 IPv4 address in xxx.xxx.xxx.xxx hex format;
except 127.0.0.1
Firmware Upgrade via
TFTP
Image File Name
none 1 - 30 characters (special characters are
dependent on OS file name limitation)
Firmware Upgrade via
TFTP
Retry Count
51 - 20
Table 12. AT-S111 Management Software Default Settings (Continued)
Parameter
AT-GS950/48PS
Default Setting
Specifications